Actuators

1. electric actuators 2. drive executor for loop electronic valve 3. light weight, compact structure 4. servo amplifier

Electric actuators

  

Overview

EA (E) series of motor driven executors are the drive devices for loop type electronic valves, capable of performing on/off and angle position control by using exterior power switching or external output signals.

The shell of this device is made up of cast aluminum alloy by the integration of the embedded engine, accurate drive system and shells. It has outstanding performances such as light in weight, with better structure, delicate visual shape, high efficiency and output torque.

Features

1. Small size, light weight, better structure, convenient in operation and installation and can be used at very narrow places

2. Manual operation function: attached cranks can be used for manual operation after power is cut off

3. Decelerating mechanism finally applies high abrasion resistant alloy worm gears with relatively more stable torque

4. Protection function: With overheat protectors in the engine to be able to prevent any damage to the engine in the overload state

5. Servo amplifiers are made up of large scale integrated circuits

Technical parameters      [servo amplifiers]

EA series

	EA-05	EA-10	EA-20	EA-40
Power supply	AC220V/ 50Hz
Output moment	50N.m	100N.m	200N.m	400N.m
Action range	0-90°C
Full travel time	15 seconds		30 seconds	60 seconds
Protection device	Engine overheating protection
Engine power	17W	25W	85W	100W
Rated current	230mA	400mA	460mA	520mA
Gross weight	2.8Kg	3.8Kg	8.5Kg	8.5Kg
Control mode	AC220V/50Hz  Power switching
Input signals	DC4-20mA
Output signals	DC4-20mA
Output accuracy	2.5%FS
Position dispatch signals	1KΩ±10%
Insulating resistance	50MΩ(DC500V)
Insulation strength	AC1500/1 minute
Output axle size	12*12mm	15*15mm	23*23mm	23*23mm

EAE series

	EAE-05	EAE-10	EAE-20	EAE-40
Power supply	AC220V/ 50Hz
Output moment	50N.m	100N.m	200N.m	400N.m
Action range	0-90°C
Full travel time	60 seconds
Protection device	Engine overheating protection
Engine power	17W	25W	85W	100W
Rated current	230mA	400mA	460mA	520mA
Gross weight	2.8Kg	3.8Kg	8.5Kg	8.5Kg
Control mode	Current signal
Input signals	DC4-20mA
Output signals	DC4-20mA
Output accuracy	2.5%FS
Position dispatch signals	1KΩ±10%
Insulating resistance	50MΩ(DC500V)
Insulation strength	AC1500/1 minute
Output axle size	12*12mm	15*15mm	23*23mm	23*23mm

Actuators