SCR voltage controllers

1. SCR voltage controllers 2. control general heating wire 3. open mold molding 4. single / three phase angle control

E series SCR voltage controllers

Overview

The E series simple type of electric power regulators are developed by our company after the P series to reduce costs of controllers, to make the volume smaller and to improve visual appearance. They are used in simply controlled places, and mainly used to control general heating wires. The entire series is formed after mold opening, so they are beautiful, economic and beneficial. They will be the highlights in the field of SCR power regulators.

Features

1. Full series mold opening and formation is beautiful and handsome, with further reduced volume and easy installation and wiring

2. With additional high speed fuses to prevent short-circuited current (di/dt) causing damage to SCR

3. Several LED indicators to immediately judge causes of failures in the case of any emergency, and they can be quickly removed

4. Overall support to 4-20mA, 2-10VDC, 0-12VDC and 1-5VDC control input

5. Multiple control modes, multiple selection, high quality without any interference

Specifications

Control input signals	Current input: 4-20mA DC, input impedance: 120Ω
	Voltage input: 1-5V, 0-5V
	Manual input: 10KΩ potentiometer
	Contact control input
Load rated voltage range	220V: 220V AC +/- 10% 50/60Hz
	380V: 380V AC +/- 10% 50/60Hz
Effective value current and refrigerating system	Compulsory air cooling system 40A, 60A, 80A, 100A, 120A
Control mode	Phase control
	Time portion zero position control at the cycle for 1 second
	Adjustable cycle zero position control at the cycle regulation range between 1 and 60 seconds
	Distributive zero position control at the cycle for 1 second
Materials and exterior coatings	Steel plate/ paint coating

SCR voltage controllers